The flush-mounted transmitter is a "special model" of our S5 micro handheld transmitter. Its size enables it to be installed in a flush-mounted socket, behind a button. This gives you a switch option without the radio transmitter being "visible".
The transmitter has two transmission channels, which makes it possible to connect a series-parallel switch! The optimum receiver for this, for example, would be the UPE1 or the E17.
The S5U-868A2K00 works according to the modern KeeLoq method. Each time it is actuated, a new code is calculated. In normal use, it takes over 20 years for a code to be repeated!
The S5U-868A2L00 works with one of 262,000 possible codes, programmed consecutively ex-factory. This is an 18-bit linear code that cannot be changed.
S5U - Flush-Mounted Handheld Transmitter (2-Channel)
Functions
-
- Compact design, fits behind a normal wall switch
- Pre-wired
- Compatible with our 868 MHz AM radio receivers
- Exempt from registration and from charges! Approval according to ETS 300 220
- KeeLoq coding or 18-bit linear code
S5U-868A2L00
Specifications
-
Transmission frequency: 868.30 MHz, amplitude-shift keying 'ASK' Transmission channels 2 Coding: S5U-868A2K00: KeeLoq, hopping / rolling code
S5U-868A2L00: 1 code from 262,000 possibilities, programmed ex-factoryRange: up to 50 m in a free field Operating voltage: 3 V (1x CR2032 lithium button cell) Power consumption: typically 15 mA in transmit mode Operating temperature: -20° C up to +60° C at 30% to 80% relative humidity Dimensions: 50 mm x 24 mm x 12 mm Weight: approx. 12 g including battery Photos
-
Equipment
-
3V Battery
Spare Battery
-
Order no. / EAN (GTIN)
S5U-868A2K00
4050518000227
KeeLoq, key colour 'blue'
S5U-868A2L00
4050518000234
LinearCode, key colour 'ruby-red'