Motor Controllers
The motor and roller shutter gate controllers are universally applicable. This is emphasized by their capability and the large number of inputs and outputs. 
Furthermore, all more recent motor/ roller shutter gate controllers are certified by TÜV Nord Baumuster. (German Technical Inspection Association)
Overview
-
ACM20 - Motor Controller
For 230 V AC motors, 1-winged or 2-winged, with/without current stop
ACM230 - Motor Controller
230 V AC motor controller of type ACM230 with 'SecuSens®' obstacle detection
ACM400S - Motor Controller
Also suitable for 230 V AC motors, 1-winged, limit switch required
DCM31 - Motor Controller
For 24 V DC motors, 1-winged or 2-winged, gentle start-up and stop, SE evaluation
- certified by the TÜV -
RTS16 - Rolling Shutter Gate Controller
For 230V AC tubular motors with limit switch, SE evaluation, pre-limit switch input
RTS20Q - Rolling Shutter Gate Controller
For 230V AC motors with limit switch, SE evaluation, pre-limit switch input, standby <0.5W
- certified by the TÜV - Equipment
-
868 MHz Radio Modules
HF modules
433 MHz Radio Modules
HF modules
HQAM Smart - wireless smartphone module
HF / BT-Modul
ST Controller - ST62T25CB6
ST62T25CM6 -> ST62T25CB6
40 MHz Radio Modules
HF modules
27 MHz Radio Modules
HF modules
Traffic Light Plug-In Card
...for the ACM20 motor controller for switching a red/green traffic light
Code Locks
including 5m cable, suitable for RTS20Q
One-Way Street Plug-In Card
...suitable for ACM20, for switching two red/green traffic lights
Light Barriers
Through-beam light barrier, retro-reflective light barrier
Mult-Function Card
...enables different special functions in the case of ACM230 / ACM400S.
QuickLog25
Add-on card / functional enhancement
QuickTX
Radio station module / additional card for RTS20Q
SE Evaluation
...for motor controllers 5801/5806/ACM20
Cut-off relay
...suppress up to 4 long control lines
Security Strip Evaluation
...for electrical switch strips with 1.2 K or 8.2 K terminating impedance
Rod Antennae
for 868 MHz, 433 MHz, 40 MHz and 27 MHz
Transponder
including 5m cable, suitable for RTS20Q