No room to install a normal radio receiver? The solution is UPE1! The flush-mounted receiver is fitted either to a normal flush-mounted installation socket or, say, to a lamp socket, thereby being invisibly integrated into the wiring. If fitted to a deep flush-mounted socket, the UPE1, which is only 21 mm high, can also be installed behind a flat switch or such like, without losing the previous switching point. This converts a normal socket into a radio socket in next to no time.
The radio receiver has several operating modes that can be selected. In addition to the normal switch functions, there is also a switch-off timer, for, say, a staircase lighting control unit.
UPE1 - Flush-Mounted Radio Receiver (1 Channel)
Functions
-
- 1-channel radio receiver, 230V in 433 MHz
- Operating modes: pulse, surge, targeted ON/OFF
- Switch-off timer, configurable from around 1 second up to around 18 hours
- Relay output, 230V/AC, 2A potential-bound (switches “L”)
UPE1-433A100
Specifications
-
Reception frequency: 433.92 MHz/AM (see UPE1 label) Reception channels: 1-channel receiver Coding: 12-bit, 18-bit, or Keeloq, self-learning, max. 13 codes (transmitter keys) can be taught in Antenna: integrated (no ext. antenna required) Operating voltage: 230 V, ± 10% 50 Hz Standby: < 1W Input: ext. command input for buttons or switches 230V (L) Output: 1 closing contact 230 V/AC 2 A ohmic load, switches (L) Switch-off timer: programmable from 1s ... around 18h, in 1s increments Operating temperature: -20° C up to +70° C at 35% to 85% relative humidity Dimensions: approx. 46 mm x 46 mm x 21 mm, plastic housing, IP 20 (mounting straps can be broken off) Weight: approx. 35 g Photos
-
-
Order no. / EAN (GTIN)
UPE1-433A100
4050518000500
1-channel radio receiver